Tweet
Hello I am rebuilding a basket case 93 Z34 in my shop, and most of the engines top end came in a box in the trunk. After inventory I found I need the intake hose. Have been able to reassemble most of it, I also have an errant two wire connector under the throttle body that I cannot find a home for. Any idea's here?? Curt
-
\"Experimentation\" the mark of a verteran weekend garage warrior -
that wire is probably for the coolant temp sensor, if you look hard enough you will see it under the throttle body in the lower intake manifold,on the side 90* from the thermostat.
JakeGM Goodwrench Tech - GM Certified
1991 Pontiac Grand Prix GTP - 3.4L DOHC , 5 Speed Manual Transmission , Turbonetics 62mm turbo, Turbonectics Evolution Wastegate , Turbonetics Raptor BOV , Large Front Mount Intercooler , AEM Methanol Injection , Car is running at 11PSI currently with methanol injection.
Runs 13.4 In the 1/4 with a 3 second 60 foot -
Ok thanks for the help I found the CTS missing!! replaced it and found the connector wires too short, so I added wire. The dang thing is still a no start.... working on that too! It had been driven into water and flooded out the engine and maybe the ECM. One thing at a time.....many thanks Curt\"Experimentation\" the mark of a verteran weekend garage warriorComment
Comment