Announcement

Collapse
No announcement yet.

HELP..No manual..Coolant flush???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HELP..No manual..Coolant flush???

    We just got a 1992 Grand Prix SE 3.4 DOHC.In the process of changing the coolant, noticed a sticker instructing to check with the manual for special instruction or could cause motor damage!! I also foung two bleeder screws on the radiator.Can someone let me know what the deal is with this.
    \'93 Mitsubishi Diamante 3.0 DOHC V6
    \'92 Grand Prix SE 3.4 DOHC V6

  • #2
    Re: HELP..No manual..Coolant flush???

    Originally posted by loucks3
    We just got a 1992 Grand Prix SE 3.4 DOHC.In the process of changing the coolant, noticed a sticker instructing to check with the manual for special instruction or could cause motor damage!! I also foung two bleeder screws on the radiator.Can someone let me know what the deal is with this.
    You mean bleeder screws on the coolant pipes? What I do is start it up, open the screws one at a time until coolant comes out, and close them up. It gets rid of trapped air so your engine doesn't overheat. Might take a couple warmup/cooldown cycles until you get all the air out.
    Okay now, that's enough of that.

    Comment


    • #3
      Thank you very much.We don't have the manual and don't want to screw up the car.Just had to make sure.
      \'93 Mitsubishi Diamante 3.0 DOHC V6
      \'92 Grand Prix SE 3.4 DOHC V6

      Comment

      Working...
      X