Spark Plug Wires

[Ghettoracer]

I was reading the write up on custom MSD wires for the 91-93 3.4L and it looks very spendy to get all the stuff together to get a quality set of spark plug wires. My question is would the 96-up 3.4L spark plug wires fit just as well as the 91-93? Would wire length be an issue since the wires are under the header mani?

[pocket-rocket]

The 96/7 ones would be too short to fit on the 91/5 for the rears. The fronts would probably reach, but not the rears. Reason being the 96/7 are relocated to where the MAP sensor sits on the 91/5 engines.

[HayesPerformance]

If you need the long MSD housing's for the front, I have a lot of them. I buy in large quantity from MSD...

[GTP091]

Do you have the coil pack sides as well? I need to shorten my wires as I moved the coil pack up top. My local Lordco doesn't have any in and is not overly interested in ordering them.

[HayesPerformance]

I have just about all the MSD stuff you could imagine, Yes I do have the coil boots and crimp ends...

Let me know what you need and I can ship it Canada post......

[Ghettoracer]

Would you be able to make a custom set to fit 91-93 3.4L? I just don't have the time to make anything right now. Just a round about figure shipped to Oregon (97603).

[HayesPerformance]

To the stock coil location?

[HayesPerformance]

One thing I don't like about the original wires is there quite long.

I make cutom wire sets BUT I would be sure that you don't plan on moving the coils...

[Ghettoracer]

Yeah to the stock location under the header there. I still have my stock GM wires in there so I dont know how much longer those are going to hold up LOL I dont plan on moving the coil packs anytime in the near future.