Tweet
I want to relocate my coil packs and igntion module to get away from the exhaust manifold, but will the increased resistance in the longer harness cause problems with the module ? I have to remove the module and coil packs anyway to have them tested, so I figured this would be a good time to relocate them.
-
If it\'s fun, it\'s probably illegal and if it\'s illegal I\'m probably doing it.
92 Lumina Z-34
89 Cavalier Z-24
83 Camaro Z-28 -
It should be okay with the longer harness. I have mine relocated and didnt have any problems for 2 years, although now the wiring from the CPS to ICM has failed and needs to be replaced. Make sure you braid the 2 wires from the CPS.1991 Grand Prix GTP LX9swap/Getrag 284 --- SOLD =(
1994 Corvette LT1/ZF6
2006 Dodge Dakota 4x4 3.7/42RLE -
Not trying to be a noob, but why twist the CPS wires together? Keep out interferance or what?-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay Leno
Comment
-
yup for interference protection, CPS generates an a/c voltage signal. the stock wire is twisted.1991 Grand Prix GTP LX9swap/Getrag 284 --- SOLD =(
1994 Corvette LT1/ZF6
2006 Dodge Dakota 4x4 3.7/42RLEComment
Comment