New Comp Cams Springs for Pushrod Motors

[SappySE107]

I have added the 26986 springs and will test out the 995 springs before I consider adding them to the store.

http://60degreev6.com/store/index.php?act=viewProd&productId=37

Rated at 122# @ 1.750 and 283# @ 1.175, coil bind 1.040. These springs are new for 2006 and are the new ovate wire beehive springs from Comp Cams. I have already test fit a spring and its got lots of potential for our applications. Stock seat/seal will work and coil bind allows a safe .600 lift on stock heads (.660 coil bind). Sold in sets of 12.

[germ]

nice find ben

kinda spendy, but they ment for the 60*v6 and high profile cams, so they should be well worth the money.

any idea on what the 995's spring rates are gonna be?



you're not planning on putting these with stock valves are you?

[SappySE107]

Theother springs are rated quite a bit stiffer. I dont know if it would be a good idea to use yet but the 986 spring should be fine with stock valves. The yellow LS6 springs work with stock valves.