Bolt-on performance for 3.1?

[ChapLen]

My ‘92 Chevy 3.1 (out of a Camaro) needs a rebuild…while I’m at it, might as well boost the power. Headers are a given, of course. Looking for recommendations for cams, injectors, or other bolt-on goodies for a mild performance build. It’s going to get swapped into an MGB GT. If there’s already a developed thread on this question, please point me in the right direction. TiA!

[young gun]

My ‘92 Chevy 3.1 (out of a Camaro) needs a rebuild…while I’m at it, might as well boost the power. Headers are a given, of course. Looking for recommendations for cams, injectors, or other bolt-on goodies for a mild performance build. It’s going to get swapped into an MGB GT. If there’s already a developed thread on this question, please point me in the right direction. TiA!

Talk to Ben, he runs https://www.wot-tech.com/

He'll get you the most bang for you buck.

[SappySE107]

https://wot-tech.com/comp-flat-tappet-260-cam-kit.html

I wouldn't put bigger injectors in there unless you want to have to tune it immediately. I don't know what else you could do to that engine besides a cam and make headers for it. I don't stock those cam kits and summit says Jan 30th so I am not certain if thats a real turn around time or not. The cams I have in stock are for swapping aluminum heads onto those blocks.