Tweet
We had a batch made up on the cheap, and if anyone is interested in a set as they sit, its the best deal we can offer. $40 shipped for a pair, in the lower 48. 30 a pair for each set after that in the same box.
3/8" thick mild steel, round 1 5/8" holes, but they were cut so fast that the dimension facing the head is 1 5/8, but the exit side is 1.55". This is perfect for 1.5" primaries or the holes can be straightened out to the 1 5/8". Also, the side facing the head is flat while the side facing away is not so much. It would be a good idea to hit the flat side on a sanding table to be certainly its absolutely flat.
3/8" thick mild steel, round 1 5/8" holes, but they were cut so fast that the dimension facing the head is 1 5/8, but the exit side is 1.55". This is perfect for 1.5" primaries or the holes can be straightened out to the 1 5/8". Also, the side facing the head is flat while the side facing away is not so much. It would be a good idea to hit the flat side on a sanding table to be certainly its absolutely flat.
Comment