Injector Tester

[SappySE107]

[3400-95-Modified]

Are you going to start offering cleaning services for injectors as well.

[SappySE107]

We can handle injector cleaning and testing right now for Multec 1 and 2 along with whatever the 3500/3900 injector style is called. Those are the 3 wiring harness adapters we have currently. This set of trailblazer injectors has been tested on every setting the tester has and flow rates between the injectors has been at most a 2cc spread after 1 minute of operation. This is mostly when the setting is at 7 and above. 5 and below is 1cc.

Until we get a listing on the store, the custom order function will have to do. $15 an injector cleaned, tested, new O rings and filters. Free shipping in the lower 48, work something out for anywhere else.

[3400-95-Modified]

Cool good to know. That clicking in the video is the relay firing the injectors not the injector itself right?

[bszopi]

Look at you getting all high tech. Video looks decently professional, until you get to 9 on the dial, and then it goes to typical Ben...

[robertisaar]

Cool good to know. That clicking in the video is the relay firing the injectors not the injector itself right?

i wouldn't be surprised if it were the injectors.... with how fast those things were moving on 9/10(using some rough math and some audio analysis software, I'm seeing ~.012 seconds between clicks, so either around 40 or 80Hz depending on if we're hearing just opening, just closing or both), I don't think a mechanical relay could have kept up. reed relays are quick, but I don't think they would last long at those speeds/currents, I would expect some kind of solid-state driver.

[SappySE107]

I made the video for a friend, so its lucky to be nearly professional:P The relays are for the switches and the injector driver is solid state for sure. I bought the unit off ebay and it does IAC and DBW throttle bodies (or did).

[unchained01]

Hey That's a great video