Cometic Head Gaskets $139.99

[ssdurango]

I might have to change my plans too. I'll wait another week or so for an answer. After that, this engine is going to be put back together so I can enjoy driving the truck again.

This kinda shakes my confidence in cometic as well. I feel like the guinea pig for this product. I see they finally took these down off their online ordering page.

Back to GM gaskets?

[3400-95-Modified]

Back to GM gaskets?

Thats what I'm thinking... and I hate to back out on Ben as far as the order goes.

[geldartb]

the way the time line is going im thinking this will be part of next winters stuff to get done.

its getting to the time of the season where im going to check everything over and then call it a day till next winter.

when these are done the 2nd time around ill get some.

[3400-95-Modified]

The whole problem with that is I pulled my motor apart this year... I do NOT want to be pulling it apart again next year... for one that means the heads would need to be surfaced yet again... I don't know how many times you can do that to an aluminum head before your reaching the limit of basically shaving it.

I'll keep my eye on this thread, but as ssdurango said, I can only hold out about another week after this one... Maybe 2 at the most, but I would like to have the gaskets before the middle of April.

[SappySE107]

No ETA yet, but I did hear of progress (design is done, they are no longer left/right).

[3400-95-Modified]

but I did hear of progress (design is done, they are no longer left/right).

That's a step in the right direction...

I was confused on left/right before, unless 3900's require that, but I guess that shouldn't really matter as long as there is just an "up" tab thats not going to get in the way of something exterior of the motor

[asylummotorsports]

Thats what I'm thinking... and I hate to back out on Ben as far as the order goes.

You can't! Ben is not allowing orders for these to be cancelled.

I tried!

[eckoxl]

any updates?

[SappySE107]

You can't! Ben is not allowing orders for these to be cancelled.

I tried!

Read the terms and conditions on wot-tech. Until they fail to replace the gaskets (this is their fix for the problem, not refunds), I am not breaking my terms and conditions. I am not giving them an indefinite amount of time by any means.

Waiting on engineers. That was what I heard Friday. They asked for pictures of the block Wed or Thurs, so they aren't sitting around doing nothing about this. I will update as soon as I hear something positive. Asking me for updates doesn't make things go faster.

[3400-95-Modified]

Read the terms and conditions on wot-tech. Until they fail to replace the gaskets (this is their fix for the problem, not refunds), I am not breaking my terms and conditions. I am not giving them an indefinite amount of time by any means.

Waiting on engineers. That was what I heard Friday. They asked for pictures of the block Wed or Thurs, so they aren't sitting around doing nothing about this. I will update as soon as I hear something positive. Asking me for updates doesn't make things go faster.

We just keep asking so you don't forget to update the thread.

And the long wait blows since most of us are on a schedule... I need my car done before the end of April no questions asked.... Middle of April is more desired.

[SappySE107]

Thanks for the reminders.

[asylummotorsports]

First Points race is April 17th!

[SappySE107]

3-5 weeks. They are getting the redesign started and making the new dies.

[asylummotorsports]

I can't wait that long. It's going to take two weeks to get stuff here to begin with.

Will you please ship the rest of my order as soon as you can?

I will use GM gaskets.

Thanx

[ssdurango]

Ok, I can't wait on these. Are 2004 3400 gm gaskets my best choice for my supercharged 3.4? The felpros developed a leak after a year or so. I've heard about severe service fel pros but I can't find them for the 3400. Any suggestions?