Results 1 to 7 of 7

Thread: 93-95 L32/L82 tuning software beta testers wanted

  1. #1

    93-95 L32/L82 tuning software beta testers wanted

    As you may have read in the other thread, software is available already for tuning 93-95 L32/L82 cars. Robert Saar and I have been working quite a bit on this for the last few weeks and we are very, very close to a public release.

    We are looking for one or two dedicated owners of 93-95 L32/L82 powered cars (I would prefer to have at least one person with a 94-95 F-body A4) with an ALDL cable (Moates, AKM, etc.) who are willing to do some testing to help us. I will supply the testers with a copy of the software and license as well as tuning files to test. For your trouble, you will get an unlimited tuning license for the software which will cover the above years, as well as 94-95 LT1 cars and of course a custom tune. The software has been very thoroughly tested and performed hundreds of flashes without a single failure.

    If interested, please reply to this thread or send an e-mail to support@madtuner.com.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    W-Body for Life! robertisaar's Avatar
    Join Date
    May 2007
    Location
    Camden, Michigan, United States
    Posts
    5,233
    i'd be running a 3100/4T60E test car, however the MC isn't safe to drive on the road due to trailing arm mounts that aren't quite held to the unibody anymore.

    however, that powertrain(and PCM of course) has a high possibility of being swapped into another car pretty soon, assuming the MC can't be put back on the road.
    1995 Monte Carlo LS 3100, 4T60E, OBD1 Conversion...for now, future plans include a 3900, T04E-46 (Knock-Off) turbo (For the 3100, ~T61 for the 3900), and a F40.
    Latest nAst1 files here!
    Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

  4. #3
    i am willing to be a tester if i can locate a good aldl cable locally

    edit: cable ordered

    edit#2: Cable has arrived from in 2 days from ordering.
    Last edited by 95cutlassproject; 07-16-2011 at 01:25 PM.
    Researching phase for project ( screamer engine reseach, in the coming years)

  5. #4
    OK, one spot is pending and I'd like another volunteer with a 93-95 Camaro/Firebird. Actually, two people will be fine as long as one car is a 93 and the other is a 94-95.

  6. #5
    Destruction Worker TechRod's Avatar
    Join Date
    Feb 2009
    Location
    NW Ohio
    Posts
    160
    I have 81 Chevette with a bone stock 3.4L/4L60E and PCM from a 94 Camaro and I would be happy to participate.
    I have an ALDL cable already, and can run the engine but i'm still working on brakes/lighting/interior before it hits the road.
    "It's your car. Do with it what you wish, but as you enter this unknown world you will need to invent the wheel all over again. For the adventurous and those that are backyard mechanics who have nothing but time you might like this. Most have plenty of frustrating moments and the process usually takes significantly longer then what anyone could imagine. The end result of this conversion is completely up to you." - Jon McCullough of BMCautos.com

  7. #6
    Excellent. Please e-mail me at support@madtuner.com and I will send you instructions.

  8. #7
    All beta tester slots are currently taken. Thank you for your interest and participation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •