will it survive 28 psi?

[project89]

this is 2 weeks away any word?

[Google Adsense]

[SappySE107]

I will be contacted when they want me to pay. All you have to do is show up.

[project89]

ok cool man, not trying to be pushy im just not a last minute type of person, specially since im relying on friend to tow me etc, and he needs a deff yes or no before the date.

ill just tell him its a deffinate.

tommorow i will be installing the new turbo, so ill get some pictures and nail down the specs and target boost levels for the dyno and post them up

[SappySE107]

Will you be running at the track with the exact same setup then? It would be nice to put a track time to the dyno sheet.

[project89]

yeah i will be, teh thing that sucks is i tuned for the 67 mm turbo,and now i steped down to a 61mm unit, so i gota do some retuning,

the bigger gain is going to come from the ex side i think, the new stage wheel and .82 housing should free up a good bit on the top end, the old t3 63 housing was starting to show its limits around 6,700 rpms

this new turbo will max at around 520 whp vs the old t3/t4 which would have maxed around 360ish whp and i should have been within 50 hp of that number

[project89]

well no pics i didnt get a dam thing done. got hit with a freak snow storm friggen 10-12 inches of snow grrr.hoping to get the car inside the shop tommorow or wensday at the latest

[no_doz]

just so you know im very excited to see the numbers that this thing puts down-im hoping to build a 600 horse turbo or twin turbo 3.5-i figure ill have to build the crap outta that bottom end to handle that-so i cant wait to see what yours does on what im assuming is a stock bottom end?

exactly what engine is this and what all has been done to it (were the heads made for a 3.1 or 3100 or 3400 etc...)? also thumbs up on the work so far-well done

[project89]

ben who did u talk to over there im gonna be giving them a call tommorow

if im lucky my friend will drop by the shop today and we can button the car up fully and get some pics posted.

if not it will prolly take me most of tommorow as well to button up the car,atleast its gonna be 65* out today and nice tom as well

[project89]

just so you know im very excited to see the numbers that this thing puts down-im hoping to build a 600 horse turbo or twin turbo 3.5-i figure ill have to build the crap outta that bottom end to handle that-so i cant wait to see what yours does on what im assuming is a stock bottom end?

exactly what engine is this and what all has been done to it (were the heads made for a 3.1 or 3100 or 3400 etc...)? also thumbs up on the work so far-well done

stock bottom end,hyper pistons,custom cam,ported iron heads/intake

dosent get any more basic then that

[Driver_10]

soooo......... When are you dyno the car? I want to see numbers.