Turbo, Supercharger, Nitrous.
Intake air temp sensor on obd2. Going from NA to turbo. It makes sense it should be after the IC close the the throttle body, right?
just thought i would toss this up on here for some of you guys to check out. http://www.thirdgen.org/techboard/v6/573051-my-3-4-t3.html
1999 MC 3100 injectors. How much voltage is needed to bench test them to open and close......Tom
While working on the car I observed that there are coolant lines running to the turbo via tri taps on the coolant lines running to the radiator at...
Does anyone know of a tuner that is near Indianapolis (within 1hr drive)? It would be on an OBD1 GM 88Fiero. Currently has custom tune, and slot cut...
I'm getting really close to firing this thing up and it's finally time to address the pcv setup. I've done a little reading up on this and there are...
I have finally decided to go with boost on my engine build rather then NA/hybrid. I was hoping to get some help from other more experienced members. ...
It occurred to me recently that some of you may enjoy seeing my build, and I might get some good information from posting this here too. The build...
I'm looking to see what sort of mounts you guys used to support the turbo. You know, using the early style getrag mount with the battery relocated.
Will a 3.4/3400 with hyperutectic pistons running 15 psi give "reliable" service?
i was thinking about using a oil filter sandwich for turbo oil feed. good idea or bad idea?
Can anyone tell me how to to a remote mount setup instead of under the hood, im looking to mount my turbo where the muffler goes. wut materials would...
Well ive got a start on the headers. Im going to need to order some more piping and im waiting on the 3-to-1 header collector and v-band flanges to...
1996 Pontiac Grand Prix se 2-door 3100 v6 L82 Automatic 4-Speed T40E Turbo 5-8psi I am replacing the camshaft sprocket, crank sprocket and chain...
ok so i think i finally made the decision to boost my car as opposed to building for NA. 60degreev6s can be really fast NA but it wont have the power...
Ok, so i bought a dirt cheap turbo, yes ebay. Thing is its a GarrettGT37VA .58ar/.92ar. Now, some already know its a VNT type turbo. I have a couple...
Well its time... Selling the turbo kit time to move on to something bigger and better.. Replacing it with these, Randomly i discovered it is avalible...
this is a double post since i posted in the 3.4 dohc performance section but I figured not everyone checks out every section and this may be of...
im thinking about rebuilding and turboing my cavys 3.1.. the setup im thinking.. garret T3-T4 turbo, custom headers, greddy BOV and...
ok this might have been asked before....and i'm sorry if it's annoying...but here goes....if i were to replace the pully on my supercharger....would...
hello all.... due to the popularity of the new 3800 supercharger... I was wondering if anyone has ever put a super off the 3800 eng onto the 3400....
Hey so I was just wondering what options I have to a 3400 turbo with 12psi. I'm wondering what size injectors I should be using. Its in a 86 fiero...
What's the most boost a 60/6 has been known to take? If it makes any difference, I'm specifically curious as to how much a gen 1 block can take, and...
hey guys. this might not be the right section, but ive been wondering what type of tuning should be used if im going to boost my car this summer....
Which kind of turbo would you think would be the best for a '95 cutlass supreme sl? It has a LQ1 engine.
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
