Swaps, performance parts, and maintenance for all 60V6 related transmissions. FWD and RWD
It was brought up in a different thread somewhere on here about possibly adding tranny info to the main site. One of the points made was so that I...
I recently swapped my transmission with a junkyard trans (im not expecting the world here) but everything seemed to be ok until i felt it shift quite...
I find myself needing tranny repairs and wondering if a manual swap or automatic upgrade would be better. So I have a question I hope some of you can...
I have been asked quite a few times how I managed to swap a FWD 3x00 and TKO into my 4th gen camaro. Heres a brief write-up for anyone who wants to...
Chances are in the next couple weeks I may be rebuilding a 95' N body 4T60-E in my GM automatic transmission class. Wondering if there were any...
I will be taking out my trans out of my 04 monte carlo (3400 OHV) This will be my first overhaul of a transmission other than in school. What tips /...
Hi guys thanks in advance for any help. I have a 2004 olds alero 3.4l with an automatic transmission. what trans do i have the 4t40e or the 4t45e I...
does any one know of any mounts that will bolt a 95 olds 4t60e in to a cavalier my cavalier is a 02 and had a ecotec with 4t60e but the mount is...
I noticed this a few months back when i finally got my tune to a point where it was safe to go WOT. I use to be able to go well over 6k on a WOT...
Hello guys. Long story short, I'm working on an Alero with the 3400/4T45-E that got hit on the driver side wheel. When I went to pull the axle, it...
Im wanting to install a tranny temp gauge and glowshift keeps telling me to put the sensor in the test port, but I have no idea where that is on our...
Just got finished rebuilding my valve body and WOW ! , What a Job ! I drop the frame , drop the trans, pull steel Halo off , pull the cover and...
Hello, I am awaiting the remainder of my parts to do the 284 Swap in my 95 Monte Carlo Z34. I still need to purchase a clutch and flywheel. I am...
I'm generously thinking about swapping in a 6spd from a G6 into my monte, the Fabrication part is nothing to me, but what do i do to fool the pcm so...
long story short, I made my master cylinder and clutch petal adjustable to bandaid an issue I cant figure out. anyways, right now I have the...
im guessing this is just for the 5spd cavalier/beretta guys. anyways, is there a way to just replace the ends of the cables? I broke my first one...
Hello i was wondering if anyone in the omaha/councilbluffs area can help me bleed the clutch master and slave as it seems the dealer wont touch it...
I have a 2002 3400/3500 hybrid almost complete. Is it possible to mount a Getrag F23 2010 model to ths motor in a 2002 W Body? I know the tranny...
Seeing how these mounts are discontinued and any existing one is probably flimsy/ on its way out, me and a highly skilled professional welder buddy...
Well its been a few months and a few thousand miles. I must say i couldnt be happier with the trans. If you read my prcious post you know my reaction...
I have a 98 Olds Silhouette with a 4t60e. Looking for some advice on a 1-2 shift issue. Tranny shifts fine in all gears when cold. When warmed up it...
Anyone with a 5-speed w-body can you please post a picture of how your clutch safety switch is mounted? I cant figure out where to mount mine.. TIA
Found problem to be piece of plastic in a check valve, removed and the problem went away.
I saw an earlier thread stating the diff between OBD1 and OBD2 trans sensors. Is the mount for the sensors the same? Does everything else...
Hey all! My mom got a 2000 GrandAm SE with 3400 sfi V6 and auto trans. Original transmission was changed around 110K Km for what i think is a...
Hi. I have a jaspers rebuilt 440t4 / 4t60 transmission and it shifts fine unless I am at wide open throttle. - At that point it loses all gears until...
There are currently 4 users browsing this forum. (0 members & 4 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules