Support the Site!
|
Like what you see here? Support the site to help us continue to grow.
|
|
Stuff from our Store
|
|
|
|
Members currently using Flashchat: 0
|
 |
The most chatters online in one day was 3, 05-15-2008.
No one is currently using the chat. |
 |
12-04-2008, 03:53 PM
|
#1
|
Join Date: Mar 2007
Location: Richmond, VA
Posts: 24
|
4T60E question for Gen 1 W-Body
I was wondering if 4T60E out of a 92 Z34 with a 3.4 would work in a 93 Lumina 3.1. I know the FDR is different and that I would have to chip the ECU to correct this but I need to know if the trans mount is in the same place, if the VSS is the same, and if it will bolt up to the engine. the next question is can I use the torque converter from the 3.4 with the 3.1 because I was told that it has a higher stall than the 3.1.
Last edited by DeathScythe; 12-05-2008 at 08:50 AM.
|
|
|
|
12-04-2008, 08:54 PM
|
#2
|
Join Date: Jun 2007
Posts: 202
|
If they are both 4t60E transmissions, shouldnt have a problem. Not sure if changing the torque converter will mess with the tuning tho.
|
|
|
|
|
12-05-2008, 06:59 PM
|
#3
|
|
Moderator
Join Date: Oct 2003
Location: Long Island, NY and NePA PENNA
Posts: 1,214
|
Any '91-'93 3.4 TDC transmission will work with a '93 3.1. The speedo should not be an issue as I belive the tone wheels have the same number of teeth. Torque converters should actually be the same, you can check by looking at the sticker on the nose end of the converter and comparing the 4 digit code. Should start with an F.
__________________
Lorenzo
'06 CHEVROLET Monte Carlo SS 53A4"Black Whale"
K&N FIPK, Hooker AeroChmbrs Sans Res, Solid Trns Mnt, Rotatd Torq Strut Mnt, Yelow Fogs, FRSTB
'92 PONTIAC Grand Prix SE 34TDCM5"Red Lobster"
WOT Tech Prgm 160 Deg, 2.5 Exh w/Cat & Hooker AeroChmbrs, KYB Struts, '96 Frnt Brks, '97 PD Frnt Sprgs, AWeb RSTB, 245/45/16 BFGCompT/A ZR
http://www.nycroads.com/
http://www.fquick.com/GPSE3400
|
|
|
|
|
12-06-2008, 03:05 PM
|
#4
|
Join Date: Mar 2007
Location: Richmond, VA
Posts: 24
|
what about the transmission mount, are they the same?
|
|
|
|
|
12-06-2008, 08:11 PM
|
#5
|
|
Moderator
Join Date: Oct 2003
Location: Long Island, NY and NePA PENNA
Posts: 1,214
|
All the 3.1 hardware you have will bolt up to it. Mounts, brakets, electrical connectors, shifter cable, and park/neutral switch.
__________________
Lorenzo
'06 CHEVROLET Monte Carlo SS 53A4"Black Whale"
K&N FIPK, Hooker AeroChmbrs Sans Res, Solid Trns Mnt, Rotatd Torq Strut Mnt, Yelow Fogs, FRSTB
'92 PONTIAC Grand Prix SE 34TDCM5"Red Lobster"
WOT Tech Prgm 160 Deg, 2.5 Exh w/Cat & Hooker AeroChmbrs, KYB Struts, '96 Frnt Brks, '97 PD Frnt Sprgs, AWeb RSTB, 245/45/16 BFGCompT/A ZR
http://www.nycroads.com/
http://www.fquick.com/GPSE3400
Last edited by gpse3400; 12-06-2008 at 08:14 PM.
|
|
|
|
|
12-07-2008, 11:05 AM
|
#6
|
Join Date: Mar 2007
Location: Richmond, VA
Posts: 24
|
sweet thanks for your help
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
