• 4T4x-E Mechanical Specifications Information

    by
    bszopi
    Published on 08-18-2010 03:25 PM
    5 Comments Comments
    4T40-E/4T45-E Automatic Transaxle Unit Repair

    NOTE: Click on images to see a full-size view.

    Fastener Tightening Specifications




    End Play Specifications



    Reverse Clutch Backing Plate Specifications



    On-Vehicle


    Fastener Tightening Specifications



    General Specifications



    Range Reference



    Shift Solenoid Valve State and Gear Ratio



    Shift Speed



    Flex Plate A/T

    • Flywheel to Torque Converter - 46 ft.lb.
    • Engine Flywheel Bolt - 52 ft.lb.
    Fluid Pan A/T

    • Oil Pan to Case - 124 in.lb.
    • Bottom Pan to Case [M6x1.0x19.0 (Qty.12)] - 106 in.lb.
    Capacity Specs

    • Pan Removal and Replacement - 6.9qt (US)
    • Overhaul - 9.5qt (US)
    • Dry - 12.9qt (US)
    Note: Recheck fluid level after filling system
    Comments 5 Comments
    1. SappySE107's Avatar
      SappySE107 - 08-18-2010, 11:04 PM
      I don't see everything, or the pics are cut off in a strange spot.
    1. geldartb's Avatar
      geldartb - 08-19-2010, 08:43 AM
      is there a way to make the pics smaller not thumbnail size but something smaller then someone can click on it to get the original size.

      i didn't realize the full size when i sent them to you.
    1. bszopi's Avatar
      bszopi - 08-19-2010, 01:43 PM
      How is that?
    1. geldartb's Avatar
      geldartb - 08-19-2010, 02:09 PM
      that's good i was just thinking of the people that don't have high screen resolution.
    1. mfuller's Avatar
      mfuller - 08-19-2010, 02:10 PM
      Please note that the table of available ratios has a typo - a 35/35 chain with a 3.05 Final Drive equals a 3.05 Effective (Overall), not 3.42. It's a GM typo that even shows up in my service manual.
Page Time: 0.42199 seconds      Memory: 19,644 KB      Queries: 111      Templates: 47
Server Uptime: 163 days 10 hours 21 mins      Server Load: 0.56 : 0.30 : 0.21